ENG. DOC-HELLO ACCESSORIES XIAOMI MIJIA. How to order? How to pay?On-Line camera

[LIST]

ON-LINE CAMERA XIAOMI MIJIA ACCESSORIES STORE FROM MOSCOW
Call us in Telegrams for free and we'll show you the camera included with your parcel, any part, any accessory for scooter XIAOMI MIJIA from our corporate store! While working in Moscow from 12:00 to 19:00

New funny cartoon

DOC-HELLO ACCESSORIES XIAOMI MIJIA. ENGLISH. HOW TO ORDER?
I need from you ONE BIG MESSAGE Please write to Telegram: +79258452004 with:
1. Your wish list + q`ty +сolor every points.
2. Your NAME and SURNAME
3. Zip code + Country
4. Name of Street
5. Number of Building
6. Number of your appartments
7. Your Telephone number
8. Please calculate the cost of the delivery:
Ship cost:
Europe - up to 500 gramm 16€
Europe - 600 - 1000 gramm - 20€
Europe - 1000  -1500 gramm - 28€
Izrael, USA, Australia- 32€  up to 1000 gramm.
(Delivery period uselly - 14 days)

For expl. Maximum for customs free : 4pcs Plastic deck FERRY-SS, 2pcs New brake disk, 5 pcs 5ver. metal lock
Important- choose color of lock - NEUTRAL, BLACK, RED.
Our comment about parcel cost:
We packing in the gift paper. And mark "xmas gift". Gift value for customs we always specify 0 euros. ))

9. Paying in PayPal system gecon@list.ru your goods+delivery cost.
10. Battery (Tesla new cell 3,2A - recommended) + any goods up to 5 -7 kg pack - possible only car delivery to Paris. Delivery period - 7-14 days.
11. After receiving from you the BIG MESSAGE in Telegram and money an Pay Pal, (goods+delivery cost), we pack your goods and ship to Russia. In view of the large queues in the Russian post offices, we ship once a week on Mondays. We do not provide the number of the shipments, since the search for the track numbers takes a very long time and we do not have a special employee for this long time of work. Please do not be offended, we are also not comfortable. If we had the possibility of automatic dispatch or salary payment of a special employee, our orders would have a large extra charge from above, we hope for your patience and understanding )
12. Tracking - in Telegram group - @ruscorreos.
All track numbers and who received comments of those.

13. Attention! Important! We work only in Telegram!
Your name in the Telegram should coincide with the NAME of the person who paid. We accept payments and in Telegram we search for YOUR name.
If your NAME in the Pei does not coincide in telegrams, we can not find you and your order will be paid, but it is impossible to send it.
Thank you for understanding!

Repair Xiaomi scooter Russia Moscow:
ATTENTION! DELIVERY DAYS TO PARIS THE BUTTERY:
[20:04, 13:20] Lilian: Look from Chisinau every Tuesday and Wednesday leaves a marshoutka to Paris, on Friday-Saturday there, from Moscow to Chisinau more often how to be in time
[20:04, 13:20] Lilian: Week on a discount - + 2-3dnya obshchey time approximately 10-12 days

[LIST]

TECHNICAL Telegram CHAT XIAOMI MIJIA more than 700 participants:https://t.me/joinchat/E3E-jEMgVwrtOy2QHxD1-A

Mode of behavior of retail shop in Sokolniki, peahens. 32: (The autumn prices since dec 01.2017)

Спойлер

Business hours from 11:00 till 19:00 Daily, except MONDAY
The area manager on execution of orders. Only online registration of WhatsApp. +7-926-11-11-750. It is not phone.
The international manager (English) in Telegram. Only the international sendings by Russian Post: +7926-1111-750
General phone +7-925-845-2004



Service the center in SPb: 747-12-39, 921-648-96-23
The sales office in Kaliningrad: 8-4012-400000, 8-911-481-00-90

Table of contents:
1. FERRY-FF (Flashing Firmware) - the firmware of the controllers that you bought in China as a spare part and they do not start... 1000rub.
2. FERRY-SS - (Safe & Support) - New HDPE-1000 protection of SKIN for the factory version with 3-band battery support, so that the battery does not vibrate and contacts are not soldered and then the battery capacity is not lost - 1500rub
3. FERRY-SSD - (Safe, Support, Downgrade) Bottom protection for increased 48 or 50 cells, 10 mm HDPE slidable with battery compartment 60 or 36 volts. It is also for the insulation of the standard battery at ZIMU -2.200r;
4. FERRY-BIG XIAOMI36 - (BIG BATTERY XIAOMI-36) Mileage 55 km.  The price of the redesigned XIAOMI on the increased battery is 36 volts for 50 cells of 100 kW instead of the standard battery, inside the deck -16.500 rub;
5. FERRY-BT - (Battery Trade-In) - Redemption of regular batteries in the population in working order - 4.000 rub;
6. FERRY-B60 - (Battery-60) Tuning the battery of 60 volts with an increased capacity of 48 cells TESLA or 100 kW instead of the standard inside the deck -16.500 rub;
7. FERRY-C60 (Controller 36, 60v) - Tuning controller Infineon 6 fet stitched under the wheel XIAOMI for 36 or 60 volts - 5.000rubles;
8. FERRY-R (Repair) - Repair kit of electronic components for damping recuperative bursts on the BMS card -1.500rub;
9. FERRY-MB60 (Main Board) - Set of control board scooter (for "native" organs of control) at 60 volts - 6.000 rub;
10. FERRY-COVER - Cover for dirty wheels -600rub;
11. FERRY-FLY - Butterfly to eliminate the backlash of the steering column addition unit 0,4 or 0,8 mm - 200 rub;
12. FERRY-HR (Hrenka) - oval protection of the wire of the rear lights without installing the mudguard - 100rub,
13. FERRY-BABY FACE - Silicone soft pad of any color with a soft cushion on the top head of the scooter. 500 rubles;
14. TIRE 10 INCHES - 900 rub. The new soft tire is 10 inches. 2.5 atm;.
15. FERRY-USB (USB-port) - Service to install a USB port for charging gadgets 5c. Only for FERRY-60 - 500rub;
16. FERRY-10MM - Spacer for the rear wing - 800 rub. With built-in LED. It is connected to the rear lights.
17. FERRY-FND (Fender - rear mudguard, bright red that would have seen the wing and not broken it in the crowd) comes complete with a new curly Hrenka that holds the mudguard - 400rub;
18. FERRY-BMS - BMS board, which allows a battery of 36 volts of any capacity to work with standard electronics - 3,500 rub;
19. FERRY-FF (Front Fender) - Front mudguard, 500 rubles. Rubber. Made in Germany. Just dressed and fixed.
20. FERRY-CTS (Cast Tire Service) - Service for installation of a second-generation solid tire 400 rub;
21. FERRY-BOOT (Boot) - Rubber-plastic red cap on the latch on the rear wing of red color -150rub;
22. FERRY - STNDс (Stand cup) - a small bright red cap on the footstep of Xiaokata -150rub;
23. FERRY-CH60 (Charger 60v) - Charging for 60 volts for FERRY-60 - 4.000rub;
24. Interesting contests...
25. XIAOMI FERRY-60. Electro scooter XIAOMI FERRY 60 volts +41.000 to the price of the scooter;
26. FERRY-CT (Cast Tire) - Molded tire 2nd generation - 1.600 rub
27. FERRY-TOP (Top Rain) - Anti-rain color pad (any color with a window) on the top panel - 300-400 rub.
28. FERRY-FT (Front Tube) - The front tube with a short valve, fAt, is approved by tests -1.200 rub
29. FERRY-RT (Rear Tube) - Rear tube with a long and curved valve, and fAt, approved by tests - 350 rub.
30. FERRY-FT (Floating Tire) - Tire. A copy of the original, does not require sizing, the inner smooth layer - 1.800 rub.
31. FERRY-BGT (Battery Good Tool) - Soft (console, application, etc.) which is delivered free of charge to the FERRY-BMS board. The application allows you to customize the information displayed on your smartphone.
32. FERRY-BALANCE (Symmetric Balanced PCB 10S) - Balanced balanced BMS (good, expensive) ka on 10S for any 36 volt battery - 2.000 rub.
33. FERRY-FWB (Front-wheel bearing) - Dust-proof bearing with contact seal for FRONT wheel-motor - 300 rub.
34. FERRY-RWB (Rear-wheel bearing) - Dust-proof bearing with contact seal for REAR wheel - 300 rub.
35. FERRY-IFWB- (Installation front wheel bearings) - Service for replacement of bearings in the front wheel-drive (including the bearing) - 2,500rub.
36. FERRY-IRWB - (Installation rear wheel bearings) - Service for replacement of bearings in the rear wheel (including the bearing) - 1,500 rub.
37. FERRY-L (Lock Ver/5) - The reinforced lock tongue of the addition node. Hard alu material B-95. The price is 1000 rub NEUTRAL COLOR. BLACK or RED color - 1100 rub. The kit  -"Do you ferry me?"  -1500 red gift box for proposal ))) ha ha ha For original axes 5mm. Installation method - heat with gas - knock out - set a new one - adjustable with butterfly.
38. FERRY-SA - (strong axis). New super strong instrumental steel. New axis. 2000 rus.rub.
39. FERRY-5V - Powerful 3A pause from 42 to 5 volts for USB. For faster charging Samsung (Fast Charge 2A, 3A) Installed inside the pipe goose - 750 rub.
40. FERRY-M365MAX - new firmware - 1.500 rub.;
1. Presentation, functions.
2. FAQ - questions, explanations.
3. Of. statement of guarantee.
41. FERRY-BELT - Belt for going to a cinema - 400 rubles.
42. FERRY LOCK RING - The reinforced ring for locking the lever of the folding unit. Warranty 2 weeks. 990 rub.
43. FERRY-warm. Seasonal insulation of the standard battery for use in the cold + increased protection of the bottom. Service in Sokolniki, pav. 32. The price is still uncertain.
44. FERRY-suspension. Hybrid springs for the rear wheel. The kit costs 7.000 rubles. Set includes: 2 springs + 4 mounting parts + 2 tabs in the bottom protection + fastener kit + instruction.
45. FERRY 4 detail - Reusable inserts in the wheel pads. Instead of reflective stickers. 400 rub set 4 pcs. There are different colors. Can be removed and inserted many times when mounting wheels.
46. ​​FERRY COLOR KIT - Set of colored bumpers with wheel pads. Color to choose from. Inserts are not included - separately - the color to choose -1900 rub.
47. FERRY NEW BRAKE DISK - 900 rubles

[LIST]

TECHNICAL Telegram CHAT XIAOMI MIJIA more than 700 participants: https://t.me/joinchat/E3E-jEMgVwrtOy2QHxD1-A

1. FERRY-FF (Flashing Firmware) - the firmware of the controllers that you bought in China as a spare part and they do not start...
Throughout the world, not only in Russia, many new controllers have been imported from China in exchange for the burned ones.
But they have one problem - they are not activated. That is, these controllers do not start...
We accept such controllers for activation and flashing.
Video:
https://youtu.be/4GgeN5h-CUg
There are many photos here:

Спойлер

_______
2. FERRY-SS - (Safe & Support) Bottom protection.
Maintains a regular battery with a stiffener, preventing its vibration and does not allow soldering off the contacts. If the contact falls off - the heating increases at the point of contact, the resistance and current increase - the capacity of the cells falls. The voltage can and normal shows the smartphone, but the cell does not already hold the currents... In the end, if you travel on the battery compressed by the factory film but do not solder it, then the capacity is irretrievably lost.
Protection FERRY is installed instead of standard, without any additional. rework. Used M3 screws made of stainless steel, 18 pieces, which come complete with each protection. We put the protection on any silicone sealant.
Material - low-energy high-molecular plastic - low-density polyethylene of HDPE-1000, is resistant to mechanical deformations and very wear-resistant. Due to its frictional properties, it is closest to the caprolon - it produces guides for chains for cross-country motorcycles and sliders for sports rollers.

Video about the advantages of protecting the deck from polyethylene HDPE-1000 before analogues

Brief video overview of underbody protection FERRY-SS

Videos of the process of manufacturing the underbody protection FERRY-SS

A video showing the problems of the underbody protection

Video about decoy protection for XIAOMI MIJIA, new items

Full warranty against mechanical damage - 2 years, provided that the protection performs its direct "duties" - hermetically seals the battery compartment.

Protection FERRY-SS- has a CNC-shaped inner protrusion (2mm high), which tightly holds the protection from inside the deck, and prevents its shift by curbstone and further deformation by the * screws of the threaded holes of the deck.

Protection FERRY-SS from the inside has a series of sealing materials and retaining ribs of the support stiffness of the battery.
The main preload of the battery is provided by a soft foamed polyethylene. Simultaneously with it the sagging of the battery on a more dense level is ensured by the factory rubber round pigtails, under which special stop surfaces are milled in the SS protection.

These pre-seal of two different materials, do not allow the battery to hard hit the main hard stop (soften any parasitic, albeit small fluctuations in the battery), made in the form of a massive stiffener on the SS protection from the inside. The battery weighs on it. Since the vibrations of the battery inside the deck are inevitable due to the massiveness of the battery, this three-stage vibration damping structure is most effective.
Detailed video about the new FERRY-SS protection

There are many photos here:

Спойлер

It is installed on the usual any simplest silicone sealant, than a 100% waterproof seal is achieved.
External dimensions and shape correspond to the original part. When installing, do not spare the sealant - inside it will not spoil anything, but outside in 6 hours it will come off with a neat "sausage".

FERRY-SS - is made of a single sheet of HDPE 8mm, for standard electrical equipment of the scooter from the factory - 6mm self-protection and 2mm profiled burial. Price 1500 rubles retail price, available in Moscow.

<a href=https://youtu.be/mnpdimdyFz4> Video installation instructionLIGHTprotection </a>
<a href=https://youtu.be/UEd2z7ZrHBU> Video instruction for installingBLACKprotection </a>

Video about the correct installation of FERRY-SS protection

There are many photos here:

Спойлер

______
3. FERRY-SSD - (Safe, Support, Downgrade)- a protection made of a 10 mm solid sheet of HDPE black HDPE, has an internal milled recess for a battery of increased capacity FERRY-B36 or FERRY-B60. The price is 2.200 rubles.

Installed in place of the original without rework, using the original mounting screws and any conventional silicone sealant.
The thickness of the wall in the place of deepening under the battery is 4mm.
There are many photos here:

Спойлер

_____
4. FERRY-BIG XIAOMI36 - (BIG BATTERY XIAOMI-36)
Remaking your Xiaomi to a long-range vehicle.
Increased mileage up to 55 km.!
BIG BATTERY 36 - battery inside the deck of the scooter 36 volts.
Battery Option 1:
FERRY-B36Chpok- Available in Moscow - 16.500 rubles, the manufacturer 100 kWT, the cell "100kWt" 2.500mA, the total capacity of the assembly is 12.5 Ah.
This battery is designed for both installation in the deck, and separately placed outside the scooter - as an additional.

Battery Option 2:
FERRY-B36T- 15 Ah battery 36 volts. It is assembled from 50 cells of 3,000 mA each. Warranty 6 months. 36 volts, 15 Ah. Guaranteed mileage and capacity, guarantee of current efficiency, full warranty for the entire battery and its characteristics - 6 months. The price is 22.000 rubles.
The cost of rework includes:
1. The battery you selected above;
2. FERRY-BMS - BMS board, which allows you to connect any battery to a personal controller - 3.500;
3. Increased protection of the deck FERRY-SD - 2.000 rubles;
4. Mounting and consumables - 1.000 rub
5. Voltmeter optional, as an optional option, for a fee
6. Cast tires - at will, for a fee;
7. Installation of accessories - at will, for a fee;
8. Warranty 1 year from DOC-HELLO (per battery - 6 months)
9. Trade In "native battery" minus - 5.000 rub
10. Rubber transitional seal for the exit of the rear tail cable FERRY-CR (Cabel Rubber)
Comparison of power and speed on the dynastide of stock scooter and XIAOMI FERRY:
https://youtu.be/Z9rjLbsEGV8
There are many photos here:

Спойлер

Video "field" tests tuning the battery 36v, trying to completely disembark the battery

_______
5. FERRY-BT (Battery Trade In)
Trade IN of the original battery - 4,000 rubles



<a href=https://youtu.be/sZq71Ue6sdo>Video review of the original battery</a>

[LIST]

Telegram chat on XIAOMI MIJIA:https://t.me/joinchat/E3E-jEMgVwrtOy2QHxD1-A

6. FERRY-B60 - (Battery-60)- tuning battery 60v, 16s3p (7.5Ah).
Battery Option 1:
Manufacturer - the store "100 kWT", the cells "100kWt" 2.500mA each, the total capacity of the assembly 7.5 Ah.
This battery is intended only for the use of a complete tuning kit, which includes all the elements of the FERRY-60.
Battery Option 2:
A more capacious battery of 60 volts. Collected from 48 cells of 3,000 mA each. Warranty 6 months. This battery is 60 volts, 9 Ah. Full warranty for the entire battery and its characteristics - 6 months. The price is 22.000 rubles.




<a href=https://youtu.be/QwAlvDnjcAs>Show how the 60v battery works!</a>

<a href=https://youtu.be/Olx8vNtmtzg>Video, test the 60 volts XIAOMI MIJIA</a>


______
7. FERRY-C60 (Controller 36, 60v)- the controller Infineon, sewn specially for the motor-wheel XIAOMI at 36 or 60 volts.
The price is 5.000 rubles. available in Moscow. It is intended only for the use of a complete tuning kit, which includes all FERRY elements.


<a href=https://youtu.be/rQSZdfmQs7I>Launch XIAOMI from 36, 48 and 60 volts using the Infineon controller</a>

______
8. FERRY-R (Repair)
FERRY-R - Additional electronic components built into the original electronics, preventing the failure of the scooter in the regenerative mode with a fully charged battery:

Video, how FERRY-R works

Video, how we do the scooter repair with the FERRY-R kit


______
9. FERRY-MB60 (Main Board)
FERRY-MB60 - electronic board for installation of the tuning kit FERRY-60 for scooter - any battery 60 volts + controller Infineon (FERRY-C60) + protection FERRY-SD. Allows you to connect the original POWER button, the headlight (marker), the original trigger of the gas, the brake lever and use the regenerative braking. Price 6.000 rubles. complete with Main head pcb (DC-DC 42 (60v) - 5volt).
It is installed in the "head" of the scooter instead of the regular one.
60 VOLT SET - INSTRUCTION, CONNECTION DIAGRAMS, SCHEMES PACKAGE COMPLETE, PHOTOS:
Video review of the KIT 60v suite




Instruction before installation:
REQUIRED READ!

1. All boards, for the purpose of protection from moisture, are covered with acrylic lacquer varnish.
   In connection with these before the connection of the boards it is necessary to clean all the pins of the connectors from the traces of the glue.

2. The Main head pcb must be fixed in the seat with the help of hot-melt adhesive.
   Make in the right places of the board cuts the required depth for the purpose of fixing on the ledges of the seat.

3. The connectors to the boards, after connection, are additionally fixed with a hot melt adhesive.

4. Adjust the battery signal module as follows:
  With a fully charged battery trimmer on the board set this value,
  which includes all 4 indicators on the main board. Measure the voltage on pin 1 (4-pin connector).
  On the other boards set the same voltage. In an extreme case, on trimers
  set the same position as on the test card.

5. Contacts of the 1 header of the main board on the part side are marked with labels (black dot).

6. If the size of the installation site of the power module is sufficient, insulate the board with insulating or heat-shrinkable.
   The bodies of radiators of remote stabilizers for 5V are electrically connected to the minus of the general power supply (battery).

<a href=https://youtu.be/pFo9ouk5HM0>Video - prototype test of the control board of the scooter - Main Board</a>

<a href=https://youtu.be/X_mt-veLpIQ>Video - demonstration of the operation of the control board on a 60-volt XIAOMI MIJIA</a>

Photos of the installed voltmeter on the XIAOMI FERRY 60:

Спойлер

When off, the battery voltage is 66.8 volts

Here are the parameters for the charger:

Here is the voltage on the FERRY XIAOMI 60 volts during charging:

______
10. FERRY-COVER
FERRY-COVER - Cover for dirty wheels, price 600 rub.

Video review cover:
https://youtu.be/RqvsGR5A8z8

Instructions how to properly and quickly put the cover on a dirty wheel:
https://youtu.be/tcefPznv1EQ

[LIST]

TECHNICAL Telegram CHAT XIAOMI MIJIA more than 700 participants: https://t.me/joinchat/E3E-jEMgVwrtOy2QHxD1-A
___________
11. FERRY-FLY
FERRY-FLY - Insert 0.4mm for new scooters and 0.8mm for strong backlash, for adjusting the cross-section of the rudder "Butterfly-3". In the new version it is made with some changes - the central part is thickened and the wings are lengthened.
White and black. The price is 200 rubles.
Detailed video review of the new Butterfly-3:

Video how to install the "butterfly"
There are many photos here:

Спойлер

___________
12. FERRY-HR

FERRY-HR - protection of a wire of a rear light - 100 rub ) It is executed from wear-resistant kapron.
The direction of the cable channel is made in the "new" side, where the cable is pulled up and properly laid.
She is also FERRY-FND in which the rear mudguard and the special form of FERRY-HR are combined into a single knot.
FERRY-HR for mounting the mudguard as well as the usual protects the wire from rubbing.
There are many photos here:

Спойлер

<a href=https://youtu.be/uMMuaImgB9I> Video about the protection of the rear-light wire </a>



Here are photos how to install АУ and photos of the frayed wire:

Спойлер

___________
13. FERRY-BABY FACE - Silicone soft pad
Silicone soft pad of any color with a soft cushion on the top head of the scooter. 500 rubles.

_________________
14. TIRE 10 INCHES - The new soft tire is 10 inches. 2.5 atm
It is well placed under the front wing without rework (perhaps with a bolt)
For installation under the rear wing - requires installation FERRY-10mm - spacer under the rear wing.

_________
15 FERRY-USB (USB-port) and an additional 12-volt port.
FERRY-USB - Service for connecting an additional USB port for charging gadgets 5c. Only for FERRY-60.
The USB output can be used only as a remote lanyard with a street USB connector with a lid.
Also from the version of 60 volts it is possible to deduce an additional 12 volts through the oval windows on the "scythe" of the scooter.


_________
16. FERRY-10MM - Spacer for the rear wing
With built-in LED. It is connected to the rear lights. 800 rub.

[LIST]

TELEGRAM chat on XIAOMI MIJIA:https://t.me/joinchat/E3E-jEMgVwrtOy2QHxD1-A

17. FERRY-FND (Fender) - Rear mudguard of bright red color
The bright red color of the wing FERRY-FND (Fender) attracts attention, especially in the crowd, in the transport, that would not accidentally break your rear wing. The price is 400 rubles.
Being a mudguard, it protects the bottom of your pants from splashing in dirty weather.
The red mudguard is made of soft material, like silicone, it can not be broken if accidentally touched.
Comes complete with FERRY-HR, which has its own special configuration - ledges, which mechanically secure the mudguard.
The new FERRY-HR additionally, in addition to the standard rear fixing screws, can be fixed to the bottom of the wing for a instant adhesive, obtaining an additional fixation to the wing.
Set FERRY-FND - protection of the wire of rear lights FERRY-HR + rear mudguard, costs 400 rubles.
There are many photos here:

Спойлер

VIDEO demonstration of the mudguard FERRY-FND

Here are more pictures of the mudguard:

Спойлер

Video - reason for wiping the rear wire:
https://youtu.be/Pxg5bKH2YrQ

_________
18. FERRY-BMS
FERRY-BMS - BMS board, which allows a 36 volt battery of any capacity to work with standard electronics.
Supplied with a set of cables for easy installation. The price is 3.500 rubles.
We are preparing our own version of the firmware, so in time we will depart from the factory and we will be able to configure the configs we need.
Now, while this BMS card does not respond to the change of firmware. In any case, it is under the guarantee of DocHello.
This BMS is designed for a battery that has (FOR NOW) its built-in balancing board and a rated voltage of 36 volts.
Comes with a free USB setup console. It connects to the computer - for those who want to see on the smartphone's screen not 160% and 100% or less and the voltage of its battery.

The second version of this BMS FERRY-BMS-2 will already be with balancers under 50 cells.
This is the maximum number of cells that can fit into the deck of the 10S 5P scooter, taking into account the protrusion of 5 mm down and using another deck protection.

We will offer two types of battery assemblies for 50 cells - 12.5 Ah and 15 Ah.
But you can use any of your batteries... no difference.
At any time, you can put your stock batteries back.

The price of FERRY-BMS is 3,500 rubles.
There are many photos here:

Спойлер

In the kit there is such a rubber for the wire of the rear light:
https://youtu.be/aozaJGOHHYQ

_________
19. FERRY-FF (Front Fender) - Front mudguard
Rubber. Made in Germany. Just dressed and fixed. 500 rubles.

Video review and instructions for installing the front mudguard:

_________
20. FERRY-CTS (Cast Tire Service)
FERRY-CTS - Service for the installation of a second-generation solid tire. We make the preparatory procedure for installing the tire - its boiling. It is recommended to install only on the rear wheel.
Very useful video: Why the wheels are blown off from XIAOMI MIJIA

If you bring a separate wheel (front OR rear) - then the bus installation is 400 rubles.
If you bring the scooter in its entirety - it additionally disassembles and assembles - it's still PLUS 1000 rubles

<a href=https://youtu.be/BuHo2MU6E1c>Video review of the new 2nd generation solid tires for XIAOMI, installation</a>

<a href=https://youtu.be/mTO-oHG1xEs>Video - comparison of solid tires for XIAOMO MIJIA</a>

<a href=https://youtu.be/n6AK4hwKtVY>Video for installing a solid tires</a>

21. FERRY-BOOT(Boot) - Rubber plastic cap on the latch on the rear wing of red/
It is made of elastic rubber, which is very difficult to remove. The price is 150 rubles.
Colors black and red
Video how to put on a "boot"
There are many photos here:

Спойлер

22. FERRY - STNDс(Stand cup) - a small bright red cap on the step of the scooter.
It is made of rubber with special properties. Beautiful. ) The price is 150 rubles.
Colors red and black.
There are many photos here:

Спойлер

23. FERRY-CH60(Charger 60v) - Charging 60 volts for the FERRY-60. 4.000 rubles.
An original charging plug is installed from the stock version of the 36 volt version.
There are many photos here:

Спойлер

[LIST]

Telegram chat on XIAOMI MIJIA:https://t.me/joinchat/E3E-jEMgVwrtOy2QHxD1-A

24. Contests.
1. Candy in the parcel. The winner is Zelenograd.
2. Sticky label in the rear wing 1201. Winner of Ukhta
3. The notch on the defense on scooter "VIP". Winner - Moscow

25. XIAOMI FERRY 60 volt. 60 volt version of the XIAOMI MIJIA.
Price of additional alteration without scooter - 41.000 rub.
The speed is up to 40 km/hour.
Mileage - depends on battery, wind, terrain, rider's weight, temperature and mood
Pumped current in the motor-wheel is 21 amperes.
Color - standard black or white. The scooter itself is completely new, included in the price.
The onboard voltage is 60 volts.
Battery 16s3p. 60 volts In a charged state, the battery has a voltage of 66.8 volts.
2 battery options:
Manufacturer 100kWt, elements 2500, battery capacity - 60 volts 7.5 Ah. Price 16.500 rubles
More capacious assembly, 3000 mA cells, battery capacity - 60 volts 9Ah. Full warranty 6 months. The price is 22.000 rubles.
Controller "Infineon 6 fet" - 5.000 rub
Headboard 60 volts, power button, headlight, clearance, brake - 6.000 rub
Output 5 volts, output 12 volts (additionally specified, not included in the price)
Voltmeter - included in the price
Bottom protection increased for 48 cells -2000 rubles, warranty for protection 2 years
Brakes - stock
Follow - yes
Regenerative braking - is
Stickers FERRY and 60 VOLT - are included in the price.
A common fuse that disconnects the battery completely is included in the price
Charger, adapted for the drain sock charging - 4.000 rub
Mounting and consumables - 6.500
All accessories (butterfly, cover, FERRY-HR, mudguard, cap) - included in the price
Rubber transitional seal for the exit of the rear tail cable FERRY-CR (Cabel Rubber) - included in the price
Tires (either glued or solit) - the price and equipment is negotiated additionally.
Trade-In of the original battery - minus 5.000 rub
Warranty for the scooter is 1 year, for Tesla battery 6 months, for the remaining batteries - without warranty on batteries.
Price: 61.000 with the Battery 9Ah, given the Trade-In of your battery, based on a new scooter, its cost is included
Price 55.000 with the Battery 100 kWt 7.5 Ah, given the Trade-In of your battery, based on a new scooter, its cost is included
The price of 40.000 given the Trade In of your battery, with a 9Ah battery based on your scooter that is
The price of 35.000 given the Trade In of your battery, with the batteries 100 kW 7.5 Ah, based on your scooter
The price of 30.000 given the Trade In of your battery, with the LG battery on order from China (35 days) based on your scooter
In the future, an instruction will be prepared for self-assembly, to be sent to the regions. Be attentive, with self-installation warranty support is not provided...
Video reviews of 60 volt:

https://youtu.be/OLoACUgH-lU

https://youtu.be/hUJyZDYiwkE

https://youtu.be/X_mt-veLpIQ

https://youtu.be/Olx8vNtmtzg

https://youtu.be/aj0aeQStLV8

26. FERRY-CT (Cast Tire) - Second-generation solid tire - 1.800 rub
Excellent sits with a little tightness!
Several hundred users, all with positive reviews
Suitable for riders with a weight of 75+ (plus) kg
Medium softness
We recommend to install on the rear wheel
MANY PHOTOS:

Спойлер

27. FERRY-TOP (Top Rain) - Anti-rain cover on the top panel of any color - from 300 to 400 rubles

Options of the covers:
- Black silicone soft, tightly seated, opaque - LEDs in it can not be seen! Price 400 rubles
- White silicone soft, tightly seated, semi transparent. LEDs and logo are visible. the price is 400 rubles.
- Red silicone, soft, translucent. LEDs are seen badly. price - 400 rubles.
- Children's dark gray with a large soft bumper - a thickening with an air cushion so that children do not beat teeth against the sharp edge of the top panel. LEDs can be seen badly. The price is 500 rubles.

Attention! old hard plastic covers are no longer being manufactured since the percentage of easy damage to such covers was more than 10%. That is, black covers with a transparent window are no longer available for ordering.





28. FERRY-FT (Front Tube) - Front tube with a short valve, Ы polar, approved by tests -1.200 rub
MANY PHOTOS:

Спойлер

29. FERRY-RT (Rear Tube) - Rear tube with a long and curved valve, Y, approved for testing - 350 rubles.
MANY PHOTOS:

Спойлер

30. FERRY-FT (Floating Tire) - Tire. The best copy of the original inflatable TIRE. Absolutely smooth inside - does not require any expensive and long sizing - 1.800 rub.
A LARGE NEW VIDEO FROM A LOT OF VERY IMPORTANT INFORMATION ON TIRES, TUBES AND TIRE COVERS!
ANSWERS TO ALL QUESTIONS !:
https://youtu.be/kbya5FCWNAk
MANY PHOTOS:

Спойлер

31. FERRY-BGT (Battery Good Tool) - for free.
A console (console, application, etc.) which is delivered free of charge to the FERRY-BMS board. The application allows you to customize the information displayed on your smartphone.

Link for downloading the console BATTERY GOOD:
https://drive.google.com/open?id=0B1snM8Vt4pVnVFQ4akxSc0UxNVk
What kind of batteries can be connected to the scooter via the emulator?
The battery must meet several requirements

The operating voltage of the battery must be within the limits of the controller. For the stock firmware it is from 31 to 42.3 volts, for firmware M365Max from 31 to 50.5 volts.
The battery must be capable of generating the current required for the motor of the scooter. For stock firmware not 10A at a constant load and 15-20A for a short-term load, for firmware M365Max these values increase to 15A and 30A respectively.
The battery must have its own BMS module to control overcharge and battery charge.
BMS batteries MUST be "symmetrical", i.e. pass the current in the reverse direction, from the engine controller to the battery cells and do not disconnect the battery if the short-time excess of the charging current is observed. Failure to comply with this clause will result in damage to the controller of the scooter in 100% of cases.
BMS batteries should monitor the temperature of the elements both during consumption and when charging.

[LIST]

Telegram chat of XIAOMI MIJIA:https://t.me/joinchat/E3E-jEMgVwrtOy2QHxD1-A

32. FERRY-BALANCE (Symmetric Balanced PCB 10S) - Balanced balanced BMS (good, expensive) for 10S for any 36 volt battery - 2.000 rubles.
The usual good symmetrical BMS, which allows any of your assembly to turn into a full-fledged battery. Symmetrical BMS, in contrast to Nonsymmetric, allows the use of regenerative braking, passing current to the battery side. (A conventional unbalanced BMS does not pass the voltage back to the battery (there is a 5A key and a locking diode)).
Symmetrical BMS also protects the battery by disconnecting it when the upper and lower voltage threshold is reached.
Such BMS are considered the best and are used by all professionals. As long as our FERRY-BMS board is in fact a reconciliation board, the balancing and protection functions can be fully assigned to this symmetric BMS.
Just collect any of your batteries yourself and connect to XIAOMI MIJIA !!!
There are many photos here:

Спойлер

33. FERRY-FWB (Front-wheel bearing) - A dust-proof bearing with a contact seal for the front-wheel drive - 300 rubles.
This chic real Japanese NTN bearing has a waterproof and dustproof contact seal that works like an oil seal. This means that its covers have special shapes and elastic material from which they are made. Having an internal metal reinforcement in the form of a steel ring, the lids hold a mold, and the resilient gland seal, which CONTACTs with the sealing surface of the metal inner race bearing ring, snugly and with a slight tightness abuts against its running surface, processed to the highest finishing quality applicable for treadmills stuffing box seals.
Pictures of the bearing for the front motor wheel:

Спойлер

34. FERRY-RWB (Rear-wheel bearing) - Dust-proof bearing with contact seal for REAR wheel - 300 RUB.
This chic real Japanese NTN bearing has a waterproof and dustproof contact seal that works like an oil seal. This means that its covers have special shapes and elastic material from which they are made. Having an internal metal reinforcement in the form of a steel ring, the lids hold a mold, and the resilient gland seal, which CONTACTs with the sealing surface of the metal inner race bearing ring, snugly and with a slight tightness abuts against its running surface, processed to the highest finishing quality applicable for treadmills stuffing box seals.
Pictures of the bearing for the rear wheel:

Спойлер

35. FERRY-IFWB- (Installation front wheel bearings) - Service for replacement of bearings in the front wheel-drive (including bearings) - 2.500 RUB.
Service Center DOC-HELLO offers a service for re-pressing (replacement of bearings in the front motor-wheel). The price of the service includes 2 new Japanese NTN bearings. The cost is 2.500 rubles

36. FERRY-IRWB - (Installation rear wheel bearings) - Service for replacement of bearings in the rear wheel (including the bearing) - 1,500 rubles.
Service Center DOC-HELLO offers a service for re-pressing (replacement of bearings in the rear wheel). The price of the service includes 2 new Japanese NTN bearings. The cost is 1,500 rubles.
There are many photos here:

Спойлер

37. FERRY-L V5 (Lock 5 ver.) - The reinforced lock tongue of the addition unit of material B95 is 15% stronger than D16.
The price is 1000 rub NEUTRAL COLOR.
BLACK or RED color - 1100 rub.
The proposal wedding kit  -"Do you "ferry" me?"  -  for proposal ))) ha ha ha... The price is 1500 rubles. Wedding red box +Black lock+black butterfly 0,4+ Black * M6x16mm


Planted on the staff axis. The hole diameter is 5mm. Attention! The new 3 version requires a new slightly elongated central bolt - but it's up to you. Look: Native acts on 4.6 mm of the new tongue.. and from the regular he "peeps" at 8 mm. That is, for the new tongue version 3 you need a bolt M6x16. In accordance with GOST all nuts have 3-4 working coils. The staff bolt protrudes by 4.5 turns. In principle, this is enough. But this is in accordance with GOST. Or maybe you want to be more reliable? Then take 16 mm long. He acts 2 turns more. This is already more than GOST.
Installation Instructions:
1. Unfold the fasteners and move the plastic rings to the "head" of the scooter. These ones:

2. You warm the factory tongue with gas:


3. Knock out a 4 mm pin from the heated tongue.. like this:

4. As a result, we obtain separately the staffing axis and the old bent tongue:

5. From this "golden reserve of the Bank of Russia" we take one new tongue:

6. In the reverse order, we set up a new one like this:

7. The staff bolt protrudes from the original tongue by 8 mm:

8. From the new tongue the staff bolt protrudes by 4.6 mm. You can leave the staff, you can buy a new M6x16

9. Please note that the new tongue is stronger and fAtter than the regular one! Necessary to adjust the node again!

Helpful hint:
That the node of addition in an axis of folding no longer creaked - go through the entire folding unit with a thick synthetic grease!
<a href=https://youtu.be/5JFJUiPppqk>Video review of the new version 3 of the tab - how it differs from V2 and from the first version of V1</a>
<a href=https://youtu.be/O8kbbQPpjv>Old instruction for installing the tab if the native axis of the tab is lost or something went wrong. How to put the tongue on the usual bolt nimbus M6:: </a>

38. FERRY-SA - (strong axis). New super strong instrumental steel. New axis. 2000 rus.rub.
Video review: https://youtu.be/4krla57Kf3E

39. FERRY-5V - Powerful 3A main head pcb (DC-DC 42 - 5volt) from 42 to 5 volts for USB- 1.500 rub.
Suitable for fast charging Samsung (Fast Charge 2A, 3A)
It is located inside the ramp tube. It is necessary to connect the power contacts of this board to a separate breaker in the form of a fuse. There is also a USB connector. Displays through the oval hole in the frame.
There are many photos here:

Спойлер

All of the above data and prices are not a public offer in view of constant adjustment.
The updates are important and necessary for continuous improvement of the service.

[LIST]

40. FERRY-M365MAX - new firmware.
1. Presentation, functions.
2. FAQ - questions, explanations.
3. Official statement of guarantee.

1. Presentation of firmware from FERRY:
Many owners of the scooter are very satisfied with their "pet", but perhaps there is not one who does not want to improve it in it.

Finally, it's time to improve the software.

You all probably heard that the work in this direction began a long time ago and all this time we spent tirelessly defending microcontrollers, disassembled many kilobytes of specific code, and understood the logic of the programs. You may think that the modifications made are simple and not essential, but remember that it took us more than two months of painstaking work and this is exactly what you asked for and wanted to get in this scooter.

And so, the modifications:

a) Of course the malicious restriction of the speed of the scooter! Yes, we removed the limit of 25 km/h.... but, unfortunately at this point, everything is not so rosy... the maximum speed with which the scooter can now go is no longer limited programmatically, but there is still a limitation related to the physics of the electric motor. Unfortunately, the theoretical speed of rotation of the wheel m365 is limited by the voltage of the installed battery. With a regular battery 10S installed in the scooter, faster ~ 32km/h. the wheel can not spin, and this is without load. The real values ​​are the same, that if you weigh ~ 60kg, you have well-inflated wheels and the road is covered with smooth asphalt, you accelerate to ~ 30km/h. With a weight of 80kg, the maximum speed will be ~ 27km/h.... You say: I want to go faster! Ok, move on to the next item.

b) You can now connect 12S batteries to the state controller of the scooter and go faster... and accelerate faster! With the increase in the number of elements in the battery chain, its voltage also increases. Now this is a maximum of 50 volts when fully charged, which will give you about 15% of the speed increase and about 10% increase in power.... And what is so little, the reader will say? And the truth, why not add more power !!

c) Increase the power of the scooter almost 2 times !!! Yes Yes!!! We can almost double the power by software. Now we have almost 500Watt of constant power. Of course, the battery with this recoil, is consumed faster, but believe me, it's worth it! You can go faster, more maneuverable and safer! This modification is available both for use with a standard battery and for version 12S. The power mod gives also a speed increase, although not very large, but still nice.... Well, well, what else?

d) And we have learned to save electricity! Now, when releasing the throttle trigger to the zero position, the scooter does not brake, and it goes rolling! The gas control algorithm is now slightly different from the regular one. Dispersal and motion with the use of the motor works as before. You set the trigger of the gas with the speed at which you want to move, but if you reach the required speed, sharply release the gas to zero position, the scooter will not brake with recuperation, but will continue to roll without giving resistance. The recuperative brake from the brake lever continues to function as before, and you can safely move out of any slides.

e) Start of movement from the place (Zero start).

At the beginning of the work, this seemed not to be achievable, but after two months it was a trifle. Many in our favorite scooter, irritated a very tangible push forward, to start the movement. According to our estimates, it was necessary to accelerate the scooter to a speed of about 5 km/h. With our new firmware, you can start moving almost from the spot. You just need to push the scooter a little bit forward so that he understands the direction of the movement. The initial speed is less than 0.5 km/h.

That's all for now, but the work continues. Scooter has even a decent potential for modification and improvement!
Adapted to life by White Eagle. Stay Tuned!

2. FAQ - questions, explanations.
1) Q: How many firmware by quantity?
Formally - the firmware is one for the scooter m365. The basis is taken version 1.3.0. If necessary, try the same thing for m187.

2) Q: Is it possible to roll back to the factory firmware?
Yes, it is possible, in several different ways.

3) Q: What if the scooter is under warranty?
Pray... that it can be repaired by guarantee... or simply untie your own hands and begin to modify it. In any case, if your serial is less than 35.000 and you upgraded the firmware to MAX, then you need to modify your BMS. Either BEFORE or AFTER.

4) Q: What are you giving guarantees for electronics?

It is very difficult to give any guarantees for electronics, which we did not develop and did not produce. Everyone knows that our scooters tend to pretend to be brick. Our firmware can not fix this. We can only give a recommendation: If you are interested in the power of the scooter on a regular battery, it is very desirable to make some refinement of the BMS board. This will increase the probability of its failure-free operation at increased loads. Although, to be honest, I'm driving a modified firmware without changing the electronics for almost a month and I have everything ok.

5) Q: Is it possible to select different functions in the firmware and how many of them are there as a result.
Yes, it is possible. 4 options are available, the fifth option is to remove the speed limit, it will be included in all variants. The cost will not depend on the number and combination of options.

6) Q: What devices are needed to connect a 50V battery?

You need a modified firmware, the battery itself with a balanced BMS rated for currents of up to 30A and a BatteryGood/FERRY BMS module.

7) Q: Which brake will result, antiphase or recuperative?
Purely recuperative

Q: The price at retail ??
1500 rubles of the Russian Federation.

9) Q: What will the application show?
The same as it shows on the stock firmware... The application does not distinguish the modified firmware from the native firmware, at least for now.

10) Q: What is the name of the firmware and what are they different, if there are several.
The firmware has one code name M365Max, nothing else yet. I wrote about the options above.

11) What happens when switching to ECO mode?
In the ECO mode, the power level of the scooter is reduced to the nominal firmware output (~ 250/500 watts constant/peak)
12) What changes are made in scooter electronics?
Look at the serial number of the scooter (label pasted on the deck on the side or in the appendix). If the second number in the serial number (it looks like XXXXX/YYYYYYY) is more than 35000 - you are lucky! No change is required.
Custom firmware will work the same as the factory firmware.
For serial numbers less than 35,000, a fuse must be replaced with another with a large operating current. If this is not done, the failure of the scooter is almost guaranteed. Not infrequently this happens even on the factory firmware.
13) How can I flash my scooter?
At the moment, there is a technical opportunity to flash a scooter in three ways:

1. Without disassembling the scooter, via Bluetooth
2. By connecting to the controller of the scooter through the standard connectors
3. Using a special programmer for the controller CPU.

Each of these methods can be applied to the scooter, depending on the results that other methods have given.

The firmware on the bluetooth channel, although it is the most convenient, periodically passes through a failure, due to the peculiarities of the protocol implementation in the scooter itself. In this case, physical access to the controller can not be avoided.

14). How can I update the firmware if I'm not from Moscow or not at all in Russia?
Attention all who need the firmware! If your serial number is more than 35.000, you need to remove the controller from the scooter deck and send it to the address: Russia, company carrier CODE (and only SDEK), city Solntsevo, office SDEK SLN1, ul Glavmosstroy house 7. Recipient - IP Bondareva. Recipient's phone 89258452004

Attention to all, who needs the new 365MAX firmware! If your serial number is more than 35.000, you need to take the controller from the deck of the scooter and to send it to the address: Russia, company carrier of "SDEK" (only SDEK), city of Solntsevo, SDEK office code - SLN1 , street Glavmosstroya, house 7. The recipient - IP Bondareva. tel: 89258452004

White Eagle
Stay Tuned!

FERRY's official statement of guarantee:
Dear friends! I have some explanations for our new firmware MI365MAX, which we prepared for Xiaomi.
The scooter, which we are discussing and to which our new firmware will be applied, comes from the factory with a large percentage of the marriage. The electronics of this scooter are weak.

We are neither the developers of electronic circuits of this scooter by its manufacturer. And in spite of the fact that in principle many skates roll without breakdowns, we still can not be responsible for someone else's work, which is carried out within the framework of a strong economy of means, than we, consumers, unfortunately pay a large number of both warranty and paid repairs.
We came to the conclusion that in the event of a malfunction, we can not adequately identify the reasons for the failure of the scooter because of our firmware or not, since the cases of the scooter failures were in very different and interesting situations, I want to emphasize this especially! there was a magic coincidence?. For example, got out of the car - did not turn on... Brought home-did not turn on... passed the cat past - did not turn on.... someone had a baby - and he stopped turning on.
Or here - just received a message in the vatsap from the number 915-xxx-65-61:
"Good evening, I took you a reed tongue today, I practically put it, but not one more, now the scooter is not charging, the battery flashes 4 times red and everything. I tried to press the contacts, it does not help." Could be from the vibration (when driving the pin) that what will happen and how can I do now? " end of the quote message (author confirm ))
We heard a lot of similar stories and people very often believed in the Magic of coincidences.

And after the autopsy, it was found out that by that time he had just broken down, and everything else was just a coincidence, perhaps an easy blow to the ground or another concussion. This is not in vain invented:
Therefore, we can not take responsibility for the ridiculous and unreasoned work of Xiaomi engineers. We officially declare that all modifications and firmware will be carried out without our official warranty support - that is, we will not give a guarantee! (Done, checked, it works... great!)

Due to the lack of warranty support, we can minimize the price of the firmware.
As for modification of the required power and battery voltage, we will spend for additional money the replacement of mosfets and other electronics, put FERRY-R, which will allow the scooter not to fail in a fast and ridiculous manner.
But even in the case of this modification, to increase the power and speed, we will not give any guarantees because the standard electronics is used.
In the case when we do 60 Volt versions, we put all our electronics completely - that's the version with a standard warranty of 1 year and 6 months per battery.
In connection with the above, to collect more statistics, we invite new test participants with their scooters to test the installation of new firmware.
And a little bit about the battery, once there was a speech about the malfunction. The battery in the scooter vibrates and sags. It is already proved. Stockholders of cells do not cope with the weight of the elements. As a result, the battery still sags, vibrates and beats the center about the scooter. Deflection in the region of 0.5-0.9 mm. By simply laying soft material, this can not be cured - this amount of travel will only squeeze the material even further. Here you need a hard "stiffener" on which the battery will lie. But what would it not be beat about this rib - here and it is necessary to do precompression with soft material. Such a decision is justified. Why?
When the contact is welded (detached), at this point, the contact pin is held by the film - the heat shrinkage, into which the battery is wrapped. As a result of poor contact, this place is heated and resistance increases. As a result of this, the cell in this place works on high currents, beyond the limits for it. As a result, the cell dies.
This we have already checked on the cells that we have made out of the battery that traveled with the fallen contact.
They loaded them with currents - they do not hold it. Cells were dying. As a result, even if you soldered the contacts - the capacity of your battery is no longer 7.800...

Regards,
LIST and White Eagle

[LIST]

41. FERRY-BELT - Belt for going to a cinema

Strap on the shoulder. Convenient for going to the cinema) 400 rub.


video review:

42. FERRY LOCK RING - The strengthened ring of blocking of the lever of the knot of folding. Warranty 2 weeks.
The colors to choose from are any combination of red and black.
Price in Sokolniki in Pav. 32 - 990 rubles,



43. FERRY- warm.Seasonal insulation of the regular battery for use in the cold + increased protection of the bottom. Service in Sokolniki, pav. 32. Moves the dew point. It does not allow condensate to form on the battery, thus preventing contacts from rotting from the water, when using the scooter in the cold. The price has not been determined yet.
44. FERRY-suspension. Hybrid springs for the rear wheel
Set includes: 2 springs + 4 mounting parts + 2 tabs in the bottom protection + fastener kit + instruction.
The kit costs 7000 rub.


45. FERRY 4 detail - Reusable inserts in wheel covers. Instead of reflective stickers. 400 rubles set 4 pcs. There are different colors. Can be removed and inserted many times when mounting wheels.



46. FERRY COLOR KIT - Set of colored bumpers with wheel covers. Color to choose from. Inserts are not included - separately - the color to choose from. There are 7 parts. - 1900 rub.

[LIST]

47. FERRY FULL BRAKE DISC - the new correct brake disc - completely covers the entire shoe. 900 rubles

[dobrovolskaya]

5. FERRY-BT (Battery Trade In)Trade IN of the original battery - 4,000 rubles
Добавлено 29 Дек 2017 в 19:37
18. FERRY-BMSFERRY-BMS - BMS board, which allows a 36 volt battery of any capacity to work with standard electronics.Supplied with a set of cables for easy installation. The price is 3.500 rubles.
Добавлено 29 Дек. 2017 в 19:39
Где все это заказать.?