Инструкция по добавлению bluetooth в колесо. Осторожно, английский! Оригинал был вообще китайский...
Rockwheel comes with Bluetooth function expansion interface. Figure 1, a Bluetooth expansion interface red circle in the position shown in Figure 1, from left to right four jacks are VCC, GND, RXD and TXD, set aside the first five holes, no need to use when extending Bluetooth.
Extended Bluetooth steps: First, buy a Bluetooth module currently supports HC-06 model Rockwheel Bluetooth extension module, the Almighty himself to buy a treasure.
2, the Bluetooth module front view
Figure 3, it can be seen, the four pins are Bluetooth module VCC, GND, TXD and RXD. The second step, the Bluetooth module parameters to configure the Bluetooth module parameters, you need a "USB switch TTL" conversion modules and "four female-female DuPont line" Fortunately, there's a treasure to buy the universal.
Figure 4, USB-TTL positive
Figure 5, USB-TTL back surface can be seen from Figure 5, the pin USB-TTL modules were 3.3V, 5.0V, TXD, RXD and GND.
Figure 6, the Bluetooth module wiring in accordance with the wiring diagram 6, with the "mother of the mother of DuPont line" connecting the Bluetooth module and USB-TTL module, shown in Figure 7:
Figure 7, Bluetooth module and USB-TTL connector then install USB-TTL drivers on your computer (a treasure Goods pages are generally available for download, the installation process is omitted).
And then into the computer USB port, wait for the system to recognize COM ports, COM port can be viewed in the "Device Manager" in the name
Figure 8, I'm here to see the name of the COM port system to be recognized as COM11.
Download a software called SSCOM32
(please degrees Mother) is used to set the Bluetooth parameters.
Bluetooth parameters need to be set include: Bluetooth device name, PIN code, the baud rate.
1 Set a Bluetooth name to open SSCOM32, COM port and select COM11, baud elected 9600, click to open the serial port;
In the following text box to enter: AT + NAMExxxx, click the Send button to be renamed.
xxxx is the name you want to change
Figure 9, renamed here I changed it to Justin-RW
2, modify the PIN code in the text box to enter: AT + PINxxxx, click the Send button.
10, change PIN
Here I mosaic of evil. .
3, change the baud rate in the text box to enter: AT + BAUD5, click the Send button.
11, the baud rate change
The third step is to install the Bluetooth module to Rockwheel machine.
Figure 6 wiring in accordance with the Bluetooth module installed Rockwheel machine, Bluetooth module with double-sided foam tool holder. (Note that the Bluetooth module must be affixed to the plastic housing, absolutely not stick to the metal piece, otherwise it will cause a short circuit, causing the motherboard burned!!!)
Figure 12, to get
Fourth, the phone is paired Bluetooth devices. Installation Rock Mobile App ( http://pan.baidu.com/s/1pJvzvsf
) (Note that ordinary RW12-inch or 16-inch versions fitted 14s, a special limited edition or the players themselves can be loaded converted 16sRW 16s version), that can be connected Rockwheel it.